{"id":6286,"date":"2024-03-17T15:08:46","date_gmt":"2024-03-17T15:08:46","guid":{"rendered":"https:\/\/fakdap.com\/wordpress\/?post_type=product&p=6286"},"modified":"2026-04-28T10:46:10","modified_gmt":"2026-04-28T10:46:10","slug":"fitbikeco-shiv-v3-forks","status":"publish","type":"product","link":"https:\/\/rookie.gr\/?product=fitbikeco-shiv-v3-forks","title":{"rendered":"FitBikeCo Shiv V3 Forks"},"content":{"rendered":"

<\/h3>\n
\n
\n

Our goal was to design and produce an extremely strong fork with plenty of tire clearance.<\/p>\n

After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset.<\/p>\n

Here are a few features that make these forks so strong.<\/p>\n

    \n
  • Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we\u2019ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out\/leg connection.<\/li>\n
  • Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.<\/li>\n
  • A longer 166mm CNC\u2019d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.<\/li>\n
  • Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance.\/li><\/li>\n
  • Post weld 4Q Baked heat-treatment<\/li>\n<\/ul>\n

    SPECS ><\/h3>\n
      \n
    • Legs:\u00a0Seamless Swaged (No Welded Cap)<\/li>\n
    • Dropouts: Investment Cast<\/li>\n
    • Steerer Tube: 1 Piece CNC-Machined 4130 CrMo<\/li>\n
    • Steerer Tube Length: 166mm<\/li>\n
    • Compression: M24 X 1.5 Thread \u2013 6mm Allen Slot<\/li>\n
    • Axle to Crown: 320mm<\/li>\n
    • Offset: 25mm<\/li>\n
    • Weight: 2.25 lb (1.02 kg)<\/li>\n
    • Heat Treat:\u00a04Q Baked Post-Weld<\/li>\n<\/ul>\n